Water dispensers are an essential part of our daily lives today. It is easily found in almost all homes in the country. Undoubtedly, a water dispenser is used daily and very frequently. Hence, just like all your other appliances, it requires proper cleaning and daily maintenance. In order to keep them functioning smoothly, it is essential to ensure thorough cleaning. Additionally, the clean exterior of your water dispensers also means an assured output of fresh, clean and sanitary water.

 

Most people assume that cleaning is not required for water dispensers or that exterior cleaning suffices. But, the fact is that these products can harbour bacteria, water stains and mould over a more extended time period. As a result, they are not only difficult to remove when rigid but also harmful to your health when they enter your drinking water. 

 

However, there’s a way to avoid this issue. Go a step further from cleaning the exterior and use the correct procedure. If you need help, here is a step-by-step guide on properly cleaning water dispensers.

You can either buy a store-made cleaning solution or make one at home. To take the DIY route, add 1-part white vinegar and 3-parts water. Then, fill this up in a spray bottle for easy use. 

Remember that your safety comes first. After all, you are going to be working with water. So, cut down any possibilities of power supply to prevent electrical incidents.

It is best to keep all the essentials handy, so your cleaning process can go smoothly. Then, follow the procedure mentioned above and prepare the solution for cleaning all parts of the water dispenser.

Begin the process by establishing clean ground. Next, remove any water that’s already filled in the dispenser. This step will give you access to the reservoir for proper and easy cleaning.

Drain it clean and fill it up with the vinegar cleaning solution. You may need to remove the baffle and the spill guard. It is best to clean these spare parts separately.

You may like to read: Top 4 Water Dispenser Brands in India, Find Nearest Dealers 

Use a soft-bristled brush to scrub the entire area clean. Pay close attention to the nooks and corners and the mildew stains that can be seen through. Clean the dispenser and prepare an outlet to catch the water when you drain the cleaning solution.

Drain away the cleaning solution from the water dispenser, so it passes through all the tubes and pipes. This will allow disinfection of those parts as well. Let all the solution drain out.

After the cleaning solution is fully drained, go ahead with 2-3 rinsing cycles to remove residue. Follow by filling the reservoir with clean water and rinsing the dispenser until you see clear water coming out. Finally, let the equipment dry completely.

Move on to cleaning the removable parts separately with the vinegar solution. Get all the faucets, drip trays, taps, and other parts together. Soak them in the prepared solution with hot water. After 10 minutes, scrub them thoroughly with a brush. Now rinse these parts and let them dry before placing them back into the dispenser. 

 

Remember to avoid this process for the water bottle. You do not want it to pick up any vinegar smell.

 

This step will ensure that your drinking water stays sanitary and keeps away from mildew and mould.

Drinks such as sugary juices, fruit-infused waters, soda and more cause bacteria to grow in the dispenser’s internal parts.

Use a damp cloth or add a drop of mild soap to remove grease, oil or fingerprints from the exterior.

Ensure this step prevents the formation of mould in the water.

It is one of India’s leading air conditioning and commercial refrigeration company with a wide reach. In terms of water dispensers, Blue Star offers top-loading dispensers in varied series and bottled water dispensers. The latter is also offered options for soft push and bottom loading dispensers.

 

Want to get your Blue Star water dispenser cleaned or wish to buy a new one?

The water dispensers from this brand provide the perfect experience with digital precision in controlling drinking temperatures. There is also an option to choose between hot/normal and cold operations.

 

In terms of features, the Velstar Eltech dispensers come with a 20L large refrigerator, LCD/LED indicator, child lock for a hot water tap, 2.5 l/h cooling capacity, stainless steel tank, and a drip tray and grid. Get your hands on a new Vestar Eltech water dispenser.

Voltas is again another renowned name in the industry, a six-decade-old company. The brand is currently housed by the Tata Group and enjoys established expertise in air conditioning and cooling technology.

The water dispensers from Voltas provide not only hot and cold drinking water but also ensure safety. The brand offers a range of compact tabletop water dispensers and floor-mounted dispensers. 

 

In terms of features, these dispensers host an energy-efficient compressor, an eco-friendly gas refrigerant: an anti-corrosive pre-coated body and tropicalised machines.